The "perfect" chastity belt

Meanwhile I incorporated all changed we had to do to the belt because of limitations into the 3d design and printed the parts in ABS. I acetone vapor smoothed the parts.  This resulted in a belt that is robust enough to let me test-wear it for a short amount of time.  Well, it fit perfectly and I could already tell that it would be super comfortable. I could hardly wait for the real-deal! 

Right, so Dietmar was working on my belt and I was driving him crazy with more ideas, images, wishes and 30+ page emails 😁. I then had a thought. What about sex? What if my wife wanted sex while I was in the cage. We could use dildos or other play things but what if she wanted to have sex in the most normal way possible.  Letting me out of the belt was out of question of course so I came up with the idea of using a strap-on over the chastity cage. While this is possible of course I think it would be cooler to use the chastity belt itself as attachment point. After all, why use a harness when I am in fact already locked into a harness? So back to the design board I came up with this: It is an attachment for the chastity belt which can be put over the top of it. The thing at the front is a vac-u-lock adapter. This let's you easily attach various dildos. It is put onto the chastity-belt like this: As you can see, the vac-u-lock adapter sits right near the base of your penis. Once you...

So while poor Dietmar from SteelWorxx  was working on my belt design my devious mind had even more ideas. As with the prototypes I wanted a buttplug. I wanted to be able to add and remove this plug while still being locked into the chastity belt. Of course the plug should be lockable, meaning that I would be unable to remove it until permitted. I thought about how I could archive this and came up with a design like this: It is a 4 piece system. Plug, Plugbase, LockHolder and Lock. The plug can be screwed to the PlugBase. This way you could change the form and type of the plug.  The plug can then be inserted (while wearing the belt). The cables from the belt then go through the plug-base. You can then insert the LockHolder and the lock. After locking the lock you can not remove the LockHolder from the PlugBase anymore. And because of that you can not remove the PlugBase from the cables anymore. This is how it looks exploded: This design was definitly possible. I did another 3d ...

So with the new design agreed on Dietmar started his work on the belt. He kept me up to date and sent me lots of images. It was fascinating to see my design come to life! Of course there were lots of discussions and we talked a lot about different caveats and problems and slight changes to the design where necessary.  While Dietmar was working on the belt I also tinkered with my 3D Printer and printed the prototype from PLA. This prototype from PLA was too filigrane to wear of course, but it was proof, that the locking mechanism and general belt design worked. I then this prototype to Dietmar to make his work easier.  Indeed having a working prototype where he could take the natural measurements was the best idea we have had. Working of images and measurements is one thing, but working from something you can hold in your hand is a different story.

So after testing out the various prototypes I made, I thought that it was time to start the "real deal". I contacted Dietmar from SteelWorxx  to talk about the possibility for a custom chastity belt.  He said he has never made a full belt before but he would like to try. We talked about various things and I showed him images of my prototypes and even sent them to him so he could have closer look.  It was all very positive and he thought that everything should be possible. Since I did not have any time pressure for the project it suited him as well. He is very busy and has a lot of orders, doing custom work beside might take a while. I can work in Fusion360 (an free-for-personal-use 3D modelling software from Autocad) and I told him that I would try to design a belt and send him the images.  The following was on my wish-list: Comfortable for long term wear Ergonomic and good locking  Possibility to change the size of the belt Not too big so it can be hidden in no...

 Beside the chastity belt I also wanted to have a "lockable" buttplug. Meaning, that when caged there also would be the possibility to add a plug that could not be removed without unlocking. I thought about various methods how this could be archived. I came up with a solution that I think is quite nice. I printed the design with my 3d printer. It looked like this. Again this was printed in two halves, sanded, smoothed and painted. The form results in direct pressure being applied to the prostate. It is attached to the belt (when the belt is unlocked) by sliding it onto the steel cables in a 90 degrees angle and then turning it upside again. It can not be removed when the belt is worn because you can not pull out the plug because the steel cables are holding it inside you. You can not remove the plug from the steel cables because you can not rotate the plug 90 degrees without pulling it out... Simple but effective. The contraption looked like this after being assembled with th...

So, I found out out with the previous prototype that too much pressure at the top of the belt (where the screw sits) causes bruises. Therefore I changed the belt and added a bigger ring like structure at the top, so that the pressure is evenly distributed. I also wanted the penis cage to be a fully closed tube because with bars I feel it is less secure.  I have a 3D printer at home, so I started and printed a tube. I did this by printing two halves and then cleaning, smoothing and finally gluing together the halves. Afterwards I added a layer of paint.  This is what it looked like: This worked out much better. The pressure was distributed over a bigger area, however I still felt that the area at the top could be bigger to be even more comfortable.

So after my initial research into available devices I started experimenting with designs. I created quick prototypes with brass and copper and soldered joints to see if the general idea was viable. I liked the design of the steel-cable chastity belts. They looked comfortable, lightweight and adjustable. One thing I did not like was the cable across the testicles.  Since I did not want something like this I designed something that would go around my testicles instead of over the middle. It looked like this. Then I designed a cage for the penis that looked like this. When put together you had something that looked like this. When worn, it looked like this. This prototype was working the following way. You put your balls through the big loop. At the end of the loop two cables go through your butt-crack. Further up they separate again and go around your hip to come to the front. Your penis is stuck in a cage which is fixed to the ball-loop. The ends of the cables are then locked atop t...