The "perfect" chastity belt

So after a while looking at other belts I noticed that some of them featured an anal-opening in the cables. I always found those very erotic. Being "exposed" and "usable" while staying locked in the belt at all times is a huge turn-on for me.  True, the cables can be parted and e.g. a Dildo could be used for pegging, but I imagine for a real dick it would be painful to go between tight cables. So I designed an anal opening that goes together with my belt. This is what I came up with and what Dietmar produced (after some more 3d designing and printing etc.) I tried to design the opening absolutely ergonomic. Meaning that it is not a "flat" opening, but the "flaps" on the side have an additional bend away from the body following the curve of your butt-cheeks. This way I thought it would be more comfortable to wear and could be worn closer to the body. The opening itself is nearly 5cm in diameter, so I imagine it is enough space for any dick or toy ...

What can I say! The belt is finished! Dietmar sent me an image of the parts before shipping them to me! It is such a beautiful work!

The last missing piece was the lockable butt-plug and Dietmar from SteelWorxx  outdid himself making it to my exact specifications! What a beauty: As with the vac-u-lock adapter the butt-plug has a screwable base. So you can attach anything you like as long as you can screw it on. To prevent twisting or unscrewing Dietmar added tiny hidden side-screws at the base of the plug that when tightened prevent the contraption from turning. And here is the look after a first polish!

So while poor Dietmar from SteelWorxx  was working on my belt design my devious mind had even more ideas. As with the prototypes I wanted a buttplug. I wanted to be able to add and remove this plug while still being locked into the chastity belt. Of course the plug should be lockable, meaning that I would be unable to remove it until permitted. I thought about how I could archive this and came up with a design like this: It is a 4 piece system. Plug, Plugbase, LockHolder and Lock. The plug can be screwed to the PlugBase. This way you could change the form and type of the plug.  The plug can then be inserted (while wearing the belt). The cables from the belt then go through the plug-base. You can then insert the LockHolder and the lock. After locking the lock you can not remove the LockHolder from the PlugBase anymore. And because of that you can not remove the PlugBase from the cables anymore. This is how it looks exploded: This design was definitly possible. I did another 3d ...

 Beside the chastity belt I also wanted to have a "lockable" buttplug. Meaning, that when caged there also would be the possibility to add a plug that could not be removed without unlocking. I thought about various methods how this could be archived. I came up with a solution that I think is quite nice. I printed the design with my 3d printer. It looked like this. Again this was printed in two halves, sanded, smoothed and painted. The form results in direct pressure being applied to the prostate. It is attached to the belt (when the belt is unlocked) by sliding it onto the steel cables in a 90 degrees angle and then turning it upside again. It can not be removed when the belt is worn because you can not pull out the plug because the steel cables are holding it inside you. You can not remove the plug from the steel cables because you can not rotate the plug 90 degrees without pulling it out... Simple but effective. The contraption looked like this after being assembled with th...